Henny Penny 600 EN - Manual (Page 18)

Model 500/561/600
3-7. C1000 SPECIAL
PROGRAMMNG
(Continued)
6. Press and “HEAT” shows in the display. Use
to change the heat source: “ELEC” for electric models; “GAS”
for units with standing pilot; SSI for units with solid state
ignition.
7. Press and “VAT” and “FULL” should show in the
displays if controls are set to “PRES” in step 5.
8. Press and “MELT” and “Solid” or “LIQD” shows in the
displays. Use to choose “Solid”, if using solid
shortening, or “LIQD”, if using liquid shortening.
9. Press and hold to exit Special Programming at any time.
3-18 1209