Henny Penny 600 EN - Manual (Page 16)

Model 500/561/600
24. After the pressure drops to zero, turn the spindle
counterclockwise approximately one turn.
Do not spin or flip the spindle cross arm when opening the
lid. Damage to the acme nut inside the cross
bar could
result.
25. Raise the lid promptly to allow most of the condensation on the
lid to drain down and out through the drain channel and not
back into the shortening.
To avoid damage to the hinge, do not let the lid slam up
against its backstop.
26. Insert the handle into the basket. Lift the basket and hang it on
the side of the frypot to drain. Allow the product to drain
approximately 15 seconds before dumping it onto a tray.
27. Place the product into a warming cabinet immediately.
28. Before frying the next load, wait until is on, indicating
the shortening has reheated.
IF THE SHORTENING TEMPERATURE EXCEEDS
420°F (216°C), IMMEDIATELY SHUT OFF THE
POWER AT THE MAIN CIRCUIT BREAKER AND
HAVE THE FRYER REPAIRED. IF SHORTENING
TEMPERATURE EXCEEDS ITS FLASHPOINT, FIRE
WILL OCCUR, RESULTING IN SEVERE BURNS
AND/OR PROPERTY DAMAG
E .
3-16 608
Step 26
3-5. CHICKEN FRYING
PROCEDURES (Continued)