HP dc5700 - Manual (Page 55)

Service Reference Guide, dc5700 437804-001 4–3
Serial and Parallel ATA Drive Guidelines and Features
4.3 PATA Device Information
No PATA drives are supported on these models.
4.4 ATA SMART Drives
The Self Monitoring Analysis and Recording Technology (SMART) ATA drives for the HP
Personal Computers have built-in drive failure prediction that warns the user or network
administrator of an impending failure or crash of the hard drive. The SMART drive tracks fault
prediction and failure indication parameters such as reallocated sector count, spin retry count,
and calibration retry count. If the drive determines that a failure is imminent, it generates a fault
alert.
4.5 Hard Drive Capacities
The combination of the file system and the operating system used in the computer determines the
maximum usable size of a drive partition. A drive partition is the largest segment of a drive that
may be properly accessed by the operating system. A single hard drive may therefore be
subdivided into a number of unique drive partitions in order to make use of all of its space.
Because of the differences in the way that drive sizes are calculated, the size reported by the
operating system may differ from that marked on the hard drive or listed in the computer
specification. Drive size calculations by drive manufacturers are bytes to the base 10 while
calculations by Microsoft are bytes to the base 2.
Drive/Partition Capacity Limits
Maximum Size
File
System
Controller
Type Operating System Partition Drive
FAT 32 ATA Windows 2000/ XP 32 GB 2 TB
NTFS ATA Windows NT/2000/XP 2 TB 2 TB