beautypg.com

HP dc5700 User Manual

Page 157

background image

Service Reference Guide, dc5700

437804-001

C–5

POST Error Messages

918-Front USB Not

Connected

Front USB harness has

been detached or

unseated from system

board.

Reconnect or replace front USB harness.

922-This system only

supports SDVO/ADD2

cards in the x16 slot.

The SDVO connector on

the system board has the

physical appearance of a

PCI Express x16

connector; however, the

platform does NOT

support the use of

conventional PCI Express

cards or reversed-layout

ADD2 cards.

The platform only supports the use of

normal (or non-reversed) layout ADD2

(Advances Digital Display 2) adapter

cards inserted into the SVDO (Serial

Digital Video Output) connector on the

platform’s system board. ADD2 cards

are used to give multi-monitor

capabilities to the integrated graphics

controller.

1151-Serial Port A

Address Conflict

Detected

Both external and internal

serial ports are assigned

to COM1.

1. Remove any serial port expansion

cards.

2. Clear CMOS.
3. Reconfigure card resources and/or

run Computer Setup or Windows

utilities.

1152-Serial Port B

Address Conflict

Detected

Both external and internal

serial ports are assigned

to COM2.

1. Remove any serial port expansion

cards.

2. Clear CMOS.
3. Reconfigure card resources and/or

run Computer Setup or Windows

utilities.

1155-Serial Port Address

Conflict Detected

Both external and internal

serial ports are assigned

to same IRQ.

1. Remove any serial port expansion

cards.

2. Clear CMOS.
3. Reconfigure card resources and/or

run Computer Setup or Windows

utilities.

1201-System Audio

Address Conflict

Detected

Device IRQ address

conflicts with another

device.

Enter Computer Setup and reset the IRQ

in Advanced > Onboard Devices.

1202-MIDI Port Address

Conflict Detected

Device IRQ address

conflicts with another

device.

Enter Computer Setup and reset the IRQ

in Advanced > Onboard Devices.

1203-Game Port

Address Conflict

Detected

Device IRQ address

conflicts with another

device.

Enter Computer Setup and reset the IRQ

in Advanced > Onboard Devices.

POST Error Messages (Continued)

Screen Message

Probable Cause

Recommended Action