beautypg.com

2 type 2 battery holder – HP dc5700 User Manual

Page 138

background image

7–34

437804-001

Service Reference Guide, dc5700

Removal and Replacement Procedures— Small Form Factor (SFF) Chassis

7.19.2 Type 2 Battery Holder

1. To release the battery from its holder, squeeze the metal clamp that extends above one edge

of the battery. When the battery pops up, lift it out

1

.

2. To insert the new battery, slide one edge of the replacement battery under the holder’s lip

with the positive side up 2. Push the other edge down until the clamp snaps over the other
edge of the battery.

3. Replace the computer access panel.

4. Plug in the computer and turn on power to the computer.

5. Reset the date and time, your passwords, and any special system setups, using Computer

Setup. Refer to the Computer Setup (F10) Utility Guide.

See also other documents in the category HP Computers: