HP J4367A - Manual (Page 90)

Troubleshooting 90
Test LED flash error code Description
1 Permanently on DRAM failure
2 2 flashes DMA Mem to Mem error
3 3 flashes IRQ error
4 4 flashes Ethernet error
5 5 flashes Serial loop back error
6 6 flashes RTC error
Event notification messages do not appear on
console screen
Action: If you are using SLES 9, upgrade the KDE or use a different desktop, such as GNOME.
Event notifications are not being sent
Action: While email and SNMP trap notifications must be set up on their respective screens, notifications
must also be enabled per event on the Event Notifications screen (" Event Notifications menu " on page
64 ).
FTP error messages appear when connecting
through Linux
Symptom: When connecting to FTP through Linux, error messages about bad commands appear.
Action: The user can log in although the error messages appear.
Flash update fails over a serial connection
Action: Disable any serial port being configured during the flash update, such as iLO, or use an FTP
connection.
HP SIM lists a discovered UPS as Unmanaged in the
System Type column
Action:
1. Delete the discovered UPS from HP SIM.
2. Using the management module web interface, add the HP SIM server as a Manager on the SNMP
Managers tab (on page
62 ).
3. Rediscover the UPS in HP SIM.