HP J4367A - Manual (Page 111)

Optional power monitoring using SNMP 111
Optional power monitoring using SNMP
SNMP monitoring
Battery status, power status, events, and traps can be monitored using third-party SNMP managers.
SNMP monitoring supports the RFC-1628 MIB and the HP Power MIB (CPQPOWER.MIB).
Using the SNMP submenu (on page
82 ):
1. Configure the third-party SNMP manager to monitor the HP UPS Management Module.
2. In the third-party SNMP manager, configure the HP UPS Management Module information to be
monitor by the SNMP manager.
The HP Power MIB (CPQPOWER.MIB) can be downloaded from the HP website
( http://www.hp.com/go/rackandpower ).