HP 3300mfp - Manual (Page 96)

94 7 Faxing EN
2 Use the < or > button to select Fax Setup and press menu/enter.
3 Use the < or > button to select Fax Recv. Setup and press menu/enter.
4 Use the < or > button to select Extension Phone and press menu/enter.
5 Use the < or > button to select On or Off and press menu/enter to save your selection.
Sending a fax by dialing from a telephone
At times, you might want to dial a fax number from a telephone connected to the same line as the
product. For example, if you are sending a fax to a person whose product is in manual receive
mode, you can call first to let that person know the fax is coming.
To send a fax by dialing from a telephone
1 Load the document into the ADF input tray.
2 Pick up the handset of a phone connected to the same line as the product and dial the fax
number using either the phone’s or the product’s numeric buttons.
3 When the recipient answers, instruct the recipient to start the fax machine.
4 When you hear the fax tones, press fax/send to begin transmitting the fax, wait until the
display reads
Connecting , and hang up the phone.
Changing the HP LaserJet 3330 product’s volume settings
You can control the volume of the following fax sounds from the product’s control panel:
● The fax sounds associated with incoming and outgoing faxes
● The ring for incoming faxes
For information on controlling general volume settings, see Using the product’s volume controls .
To change the fax sounds (line monitor) volume
1 Press volume on the control panel.
2 Use the < and > buttons to select Off , Soft , Medium , or Loud .
3 Press menu/enter to save your selection.
Note The default set at the factory is Soft .
To change the ring volume
The ring is heard when the device is initially sending or receiving a call. The ring duration length is
based on the local telecom ring pattern length.
1 Press menu/enter.
2 Use the < or > button to select Common Settings and press menu/enter.
3 Use the < or > button to select Volume Settings and press menu/enter.
4 Press the > button once to select Ring Volume and press menu/enter.
5 Use the < or > button to select Off , Soft , Medium , or Loud .