HP 3300mfp - Manual (Page 173)

EN Identifying and correcting copy defects 171
Identifying and correcting copy defects
Vertical white or faded stripes
● The media might not meet Hewlett-Packard’s media specifications (for example, the media is
too moist or too rough). See
Product media specifications for more information.
● The toner might be low. See HP LaserJet print cartridges for instructions.
7 Close the lid to the flatbed scanner.
8 Lower the green lever.
9 Reinstall the cleanout by inserting it as shown. Push down on the
two tabs until the part snaps into place. It is important to install the
cleanout correctly, as future jamming might occur if the cleanout is
not properly placed.
10 Close the ADF lid and replace the ADF input tray.
7
8
9
10