HP 3300mfp - Manual (Page 34)

32 2 Getting started EN
To load originals into the ADF input tray
Note ADF capacity is up to 50 sheets of 75 g/m
2
(20-pound) media (depending on the thickness of the
media), or until the ADF input tray is full.
The minimum size for media in the ADF is 127 x 127 mm (5 x 5 inches). For smaller sizes use the
flatbed scanner. The maximum size for media in the ADF is 215.9 mm wide by 381 mm long (8.5 x
15 inches).
1 Make sure the flatbed scanner is free of media.
2 Close the flatbed scanner cover and put the top end of the original media stack into the ADF
input tray, with the media stack face up and the first page to be scanned, copied, or faxed on
top of the stack.
3 Slide the media stack into the ADF until the media does not move any farther.
4 Adjust the media guides until they are snug.
5 The document is now ready to be copied or scanned.
2 4