To change the silence detect mode, Changing autoreduction settings for incoming faxes, To change autoreduction for incoming faxes – HP 3300mfp User Manual
Page 100: Enabling stamp received faxes, To enable stamp received faxes
98 7 Faxing
EN
To change the silence detect mode
1
Press menu/enter.
2
Use the < and > buttons to select
Fax Setup
and press menu/enter.
3
Use the < and > buttons to select
Fax Recv. Setup
and press menu/enter.
4
Use the < and > buttons to select
Silence Detect
and press menu/enter.
5
Use the < and > buttons to select
On
or
Off
.
Changing autoreduction settings for incoming faxes
If the fit to page option is on, the product automatically reduces long faxes to fit on the product’s
default paper size (up to a 75% reduction), for example from legal to letter size.
If the fit to page option is turned off, long faxes print at full size on multiple pages.
If you have the stamp received faxes option on, you may want to turn autoreduction on also. This
reduces the size of incoming faxes just slightly and prevents the page stamp from forcing a
received fax page onto two pages.
Note
Make sure the paper size setting matches the size of paper loaded in the paper input tray. To change
the default paper size, see
Changing the default paper size
.
To change autoreduction for incoming faxes
1
Press menu/enter.
2
Use the < and > buttons to select
Fax Setup
and press menu/enter.
3
Use the < and > buttons to select
Fax Recv. Setup
and press menu/enter.
4
Use the < and > buttons to select
Fit to Page
and press menu/enter.
5
Use the < and > buttons to select
On
or
Off
and press menu/enter to save your selection.
Note
The default set at the factory for incoming fax autoreduction is
On
.
Enabling stamp received faxes
The HP LaserJet 3330 product is set up to print the sender’s identification at the top of each
received fax. You can also choose to have your header information included on each received fax
to confirm the date and time the fax was received.
Note
This option only applies to received faxes that are printed by the product.
To enable stamp received faxes
1
Press menu/enter.
2
Use the < and > buttons to select
Fax Setup
and press menu/enter.
3
Use the < and > buttons to select
Fax Recv. Setup
and press menu/enter.
4
Use the < and > buttons to select
Stamp Faxes
and press menu/enter.
5
Use the < and > buttons to select
On
or
Off
and press menu/enter to save your selection.