Honeywell ST 3000 - Manual (Page 26)

2.6 Setting Range Values Using Local Adjustments
Local zero and span
option For transmitter applications that do not require an SFC nor digital
integration with Honeywell’s TPS systems, ST 3000 transmitters are
available with optional local zero and span adjustments.
About local
adjustments The transmitter’s range values can be set by using the pushbuttons on
the face of the local zero and span option or smart meter. Refer to the
procedure for setting the range values to applied pressures using local
zero and span adjustments in Appendix A
 Smart Meter Reference in
this guide.
16 ST 3000 Release 300 Installation Guide 2/05