Honeywell ST 3000 - Manual (Page 116)

2 of 10 34-ST-99-36 (Addendum to 34-ST-33-39) 10/04
Purpose and
Content of this
Addendum This Addendum includes information required under the ATEX Directive regarding:
1. The appearance and meaning of each certification mark (CE Mark) that appears on
the label(s) affixed to the product.
2. Instructions for installation and use of the product.
Information required for use of this product is given in:
34-ST-25-14B - ST 3000 Smart Transmitter Release 300 and Smart Field
Communicator Model STS103, and
Installation information is given in
34-ST-33-39 - ST 3000 Smart Transmitter Release 300 and Smart Field
Communicator Model STS103 Installation Guide,
of which this Addendum is a part.
Details regarding certification marks that appear in labeling for this product are given in
this addendum.
Attention
The publications cited above and the functioning and construction (except for
labeling) of the devices described therein are essentially unchanged. The
purpose of this addendum is to provide details the purpose and appearance
of the labels attached to each device under ATEX Directive 94/6/EC.
Attention
Before installing the equipment in a potentially explosive atmosphere, please
read the information provided in this Addendum, which supports the ATEX
certifications for this product.
CE Conformity The ST 3000 Smart Pressure Transmitter is in conformity with the protection
requirements of the following European Council Directives: 94/9/EC, the Explosive
Atmospheres (ATEX) Directive, 89/336/EEC, the Electromagnetic Compatibility
(EMC) Directive, and the Pressure Equipment (PED) directive.
In conformity with the ATEX directive, the CE mark on the certification nameplate
includes the Notified Body identification number 0344 (KEMA 01ATEXQ3199)
adjacent to the EC Type Examination Certificate number.
In conformity with the Pressure Equipment Directive, models rated greater than 200
bar (2,900 psi) have an additional CE mark applied to the meter body data plate in
accordance with 97/23/EC, Article 15. Models rated at less than 200 bar have no CE
mark on the meter body data plate per 97/23/EC, Article 3, Section 3.
Deviation from the installation conditions in this manual may invalidate this product’s
conformity with the Explosive Atmospheres, Pressure Equipment, and EMC
Directives.
Conformity of this product with any other “CE Mark” Directive(s) shall not be
assumed.