HP 630 series - Manual (Page 34)

34 hp photosmart 630 series user’s manual
3 Press the Zoom In control again
and hold it until you reach the
desired size in the Image Display.
A yellow cropping frame
surrounds the area of the image
that will be captured. The
magnification is shown at the
bottom of the screen.
4 When the cropping frame is at the right size, press the
Shutter button to take the picture.
To turn digital zoom off and return to optical zoom, press the
Zoom Out control until digital zooming stops. Release the
control, and then press the control again. Digital zoom also
automatically turns off when you exit Live View by pressing
either the Live View button, Playback button, or
Share button.
NOTE Digital zoom reduces the resolution of an image, so
your picture will tend to be more pixilated than the same
image taken with optical zoom. If you just intend to e-mail
an image or post it to a website, this loss of resolution will
not be noticeable. However, in situations where the
highest quality counts (such as printing), do not use the
digital zoom; instead, use the cropping tools in your
image editing software to zero in on your subject. For
better results when using digital zoom, you may also want
to use a tripod to minimize camera shake.