HP 630 series - Manual (Page 29)

Chapter 2: Taking pictures and recording video clips 29
Using live view
The Image Display allows you to frame pictures and video clips
using Live View . To activate Live View on the Image Display,
press the Live View button. To turn off Live View, press the
Live View button again.
NOTE Using Live View consumes a lot of battery power. To
conserve batteries, use the viewfinder instead.
The following table describes the information that is displayed
in the Live View screen of the Image Display when the camera
settings are at their default values and no memory card is
installed in the camera.
NOTE If you change other camera settings or install a
memory card in the camera, icons for those settings and
an icon for the memory card will also be displayed in the
Live View screen.
# Icon Description
1 Image Quality setting (default is Best , which is
indicated by the three stars)
2 12 Pictures remaining that you can take and store in
the internal memory (depends on how much
space is remaining in internal memory)
1
2
4
3