Restoring previous settings, Choosing the language – HP 630 series User Manual
Page 18
18
hp photosmart 630 series user’s manual
Restoring previous settings
Some of the settings that you can change in the camera menus
do not remain set after you turn off the camera. However, you
can restore the settings from the last time the camera was on
and had at least one non-default setting (which could actually
be several power cycles ago) by holding down the
OK
button
while also sliding the
ON/OFF
switch to turn on the camera.
The restored settings are then displayed across the top of the
status screen. (See the previous subsection.)
Choosing the language
The first time you turn on the camera, the following screen
appears and prompts you to choose a language.
1
Scroll to the language that you
want by using the
buttons
on the
Controller
.
2
Press the
OK
button to select the
highlighted language.
NOTE
You can change the language setting by using the
Language
menu option in the
Setup
menu. See
on page 71, and then see