HP 630 series - Manual (Page 14)

14 hp photosmart 630 series user’s manual
Setup
Attaching the wrist strap
Attach the wrist strap to the wrist
strap mount on the side of the
camera as shown.
NOTE It is easiest to install the
wrist strap by inserting it from
the bottom.
Attaching the lens cap tether
1 Wrap the small loop of the
lens cap tether around the
wrist strap between the
plastic stay on the wrist
strap and the wrist strap
mount on the side of the
camera.
2 Insert the long loop of the
tether through the small
loop and pull to tighten the knot.
3 Insert the long loop of the
tether through the lens cap
tether mount.
4 Pull the long loop over the
sides of the lens cap and then
under the lens cap as shown.
Pull to tighten the knot.