HP 3900 series - Manual (Page 46)

Maintain the printer body
Because the printer ejects ink onto the paper in a fine mist, ink smudges will
eventually appear on the printer case and adjacent surfaces. To remove smudges,
stains, or dried ink from the exterior of the printer, use a soft cloth moistened with
water.
When cleaning the printer, keep these tips in mind:
●
Do not clean the interior of the printer. Keep all fluids away from the interior.
● Do not use household cleaners or detergent. If a household cleaner or detergent
has been used on the printer, wipe the exterior surfaces with a soft cloth
moistened with water.
● Do not lubricate the support rod that the print cartridge cradle uses to slide back
and forth. Noise is normal when the cradle moves back and forth.
Remove ink from your skin and clothing
Follow these instructions to remove ink from your skin and clothing:
Surface Remedy
Skin Wash the area with an abrasive soap.
White fabric Wash the fabric in cold water and use chlorine bleach.
Color fabric Wash the fabric in cold water and use sudsy ammonia.
Caution Always use cold water to remove ink from fabric. Warm or hot water
can set the ink into the fabric.
Manually clean print cartridges
If the printer is used in a dusty environment, a small amount of debris can accumulate
on the print cartridge contacts.
Gather cleaning supplies
You will need the following items to clean the print cartridges.
●
Distilled water (tap water can contain contaminants that can damage the print
cartridge)
● Cotton swabs or other soft, lint-free material that will not stick to the print cartridge
Be careful not to get ink on your hands or clothing as you clean.
Prepare to clean
1.
Press the Power button to turn on the printer, and then raise the printer cover.
The cradle moves to the center of the printer.
2. Disconnect the power cord from the back of the printer.
3. Remove the print cartridges and place them on a piece of paper, with the copper
strips facing up.
Chapter 9
44 HP Deskjet 3900 series