Print photos with a border, Border – HP 3900 series User Manual
Page 15
3.
In the What do you want to do? drop-down list, click Photo Printing-
borderless, and then select the following options:
–
Print Quality: Normal or Best
Note
For maximum dpi quality, go to the Paper/Quality tab, and
then click Maximum dpi in the Print Quality drop-down list.
–
Paper Type: An appropriate photo paper type
–
Paper Size: An appropriate borderless photo paper size
–
Orientation: Portrait or Landscape
4.
as appropriate.
5.
Click OK to print the photo.
If you printed on photo paper with a tear-off tab, remove the tab to make the
document completely borderless.
Use the
to learn about the features that appear in the Printer
Properties dialog box.
Print photos with a border
Follow these instructions to print photos with a white border.
Guidelines
●
For maximum fade resistance, use HP Premium Plus Photo Paper.
●
Verify that the photo paper that you are using is flat. For information about
preventing photo paper from curling, see the
photo paper storage instructions
●
Do not exceed the paper tray capacity: 15 sheets of photo paper.
Prepare to print
1.
Slide the paper guide to the left.
2.
For large photos, place the paper with the side to be printed on facing down in the
tray, and then push it into the printer until it stops.
The paper will extend over the edge of the tray.
3.
For 4 x 6 inch (10 x 15 cm) photos, place the photo paper in the right side of the
tray.
The side to be printed on should face down and the short edge should point
towards the printer. Push the paper into the printer until it stops.
User's guide
13