Epson Multi-mode Data Controller MFJ-1278B - Manual (Page 367)

MFJ-1278B MULTI-MODE APPENDIX H COMMAND SUMMARY
Command Paramete
r Default Mode Function Page
PACTIME n10 Packet Determines the
length of time
between transmit
and receive. 6-92
PARITY n 0 Packet Sets the parity mode for terminal or
computer data transfer. 6-92
PASS n $16 (^V) Packet Selects the ASCII character used for the
"pass" input editing character. 6-93
PAss nnn $16 Pactor Same as the PASS command in other
modes. 6-93
PASSALL ON|OFF off Packet Causes the MFJ-1278B to display packets
received with invalid CRC fields. 6-94
PIXTONES n -- FAX/SSTV Sets transmit tones for multi-level
FAX/SSTV pictures. 6-95
PKTPIX ON|OFF off Packet Allows the MFJ-1278B to print packet
pictures to the built-in printer port. 6-97
PRINTGRA ON|OFF on FAX/SSTV Determines whether the MFJ-1278B will
print the graphics to the printer or the
terminal screen. 6-98
PRINTER ON|OFF off All Turns the parallel printer port on or off. 6-98
PRINTTES -- I-command All Used to test the printer connected to the
parallel printer port. 6-99
PROFMARS -- I-command RTTY/ASCII Invokes pre-set commands for MARS
operation. 6-99
PTOver nnn I-command Pactor Designates the Pactor changeover
character. 6-99
PTSend -- I-command Pactor Same as issuing the U1 unproto
command. 6-100
QRT -- I-command AMTOR Used to break a link in AMTOR. 6-100
R -- I-command AMTOR Is the equivalent to QRT. 6-100
RADIO n 1 ALL Allows the user to select the radio port on
the MFJ-1278. 6-100
RANDOMCW ON|OFF off CW Allows the used of the random code
generator. 6-101
RBITMASK $xx 0 RTTY/ ASCII Set the bit inversion during receiving data 6-101
RECONNECT call1-9 I-command Packet Used to change the path through which
you are currently connected to a station. 6-101
REDISPLA n $12 (^R) All Used to change the redisplay-line input
editing character. 6-102
REMSYSOP call 0-15 blank M-Packet Permits the SYSOP to perform sysop
functions remotely. 6-102
RESTART -- I-command Packet Re-initializes the MFJ-1278B using the
stored parameters. 6-103
RESET -- I-command All Resets all parameters to their default
values and reinitiates the unit. 6-103
RESPTIME n 0 Packet Sets a minimum delay that is imposed on
acknowledging packets. 6-103