Epson Multi-mode Data Controller MFJ-1278B - Manual (Page 362)

MFJ-1278B MULTI-MODE APPENDIX H COMMAND SUMMARY
Command Paramete
r Default Mode Function Page
CONPERM ON|OFF off Packet Allows a connection to become
permanent. 6-32
CMSG ON|OFF off Packet Enable a message to be transmitted
whenever there is a connection made. 6-33
CMSGDISC ON|OFF off Packet Controls whether the MFJ-1278B will
initiate a disconnect sequence after it is
connected to. 6-33
COMMAND n $03 (^C) All Sets the character used to enter the
command mode from CONVERS mode. 6-34
CONMODE C|T C Packet Sets the MFJ-1278B to enter the
transparent mode or converse mode
automatically. 6-35
CONNECT C1|Cx none Packet Issues a connect from the command mode
to another packet station. 6-36
CONOK ON|OFF on Packet Determines the action taken by the MFJ-
1278B when it receives a connect request. 6-37
CONSTAMP ON|OFF off Packet Enables the time stamping when a
disconnect occurs. 6-38
CONVERS -- I-command All Forces the MFJ-1278B to enter the
converse mode. 6-38
CONVERSE -- I-command AMTOR Switches from the command mode to the
text transmission mode in AMTOR. 6-38
CPACTIME ON|OFF off Packet Enables the automatic transmission of
packets in the converse mode. 6-39
CR ON|OFF on Packet Causes the MFJ-1278B to send a
every time a new line character is sent. 6-40
CTEXT text blank Packet Determines the packet text to be sent
when a connect is made. 6-40
CSTATUS -- I-command Packet Shows streams identifier and link state of
all streams. 6-41
CWCALL ssss blank AMTOR Characters are sent as CW when ID
character are issued. 6-41
CWIDmode nn 0 Pactor Determines the CWIDmode used when in
the Pactor mode. 6-42
CWSENDCH nnn $ff CW Controls how MFJ-1278B transmits the
pending text in the CW buffer. 6-43
CWSPEEDM ON|OFF off CW Causes the MFJ-1278B to adopt the
incoming CW speed as its transmit speed. 6-43
DAYTIME D/T none Packet Sets the time and date used by the MFJ-
1278B. 6-44
DAYUSA ON|OFF on Packet Determines the display format for the time
and date. 6-45
DDisc -- I-Command Pactor This is the last resort disconnect for the
Pactor mode. 6-45
DISCONNECT -- I-command Pactor Initiates a standard Pactor disconnect. 6-45
DISplay -- I-command Pactor Displays all Pactor commands, while in
the Pactor mode. 6-45