Epson Multi-mode Data Controller MFJ-1278B User Manual
Page 315

MFJ-1278B MULTI-MODE HARDWARE
MULTI-LEVEL INTERFACE CONNECTOR,J13
The MFJ-1278B provides the user with the capability to perform Multi-Level FAX
operations as well as Color SSTV work. Multi-Level FAX and Color SSTV operations are
accomplished through the addition of a Multi-Level Interface. The Multi-Level Interface
controls both transmit and receive operations for the Multi-Level FAX and Color SSTV
modes. Below in Table 8-4 are the pin outs for the ribbon cable connected at J13:
Table 8-4 J13 Pin Out
J13 Pin #
Pin Function
1
No connection
2
No connection
3
Connect Tone Output
4
Ground
5
SSTV/FAX receive signals
6
153.6/307 KHz Clock Select
7
SSTV/FAX select
8
SSTV/FAX transmit tones
9
SSTV/FAX receive control
10
SSTV/FAX transmit control
11
-5 Volts
12
Data Bit 7
13
Data Bit 6
14
Data Bit 5
15
Data Bit 4
16
Data Bit 0
17
Data Bit 1
18
Data Bit 2
19
Data Bit 3
20
+5 Volts
EXTERNAL MODEM INTERFACE CONNECTOR - J14
The External Modem Interface Connector, J14 is available for easy and quick addition of the
MFJ-2400 or MFJ-9600 modems. The External Modem Interface Connector, J14 is a 5-pin
straight type header located just in front of the RS-232C serial port connector. Below in
Table 8-5, is the pin out of the External Modem Interface connector, J14:
Table 8-5 External Modem Interface Pin Out
J14 Pin #
Pin Functions