Mfj-1278b multi-mode appendix h command summary – Epson Multi-mode Data Controller MFJ-1278B User Manual
Page 365
MFJ-1278B MULTI-MODE APPENDIX H COMMAND SUMMARY
Command
Paramete
r
Default
Mode
Function
Page
LFADDALT
ON|OFF
on
RTTY
Enables the MFJ-1278B to go to the next
line when a
RTTY mode.
6-67
LFIGNORE
ON|OFF
off
Packet
Line feeds are ignored except in
transparent mode.
6-68
LISTEN
--
I-command
AMTOR
Used to monitor someone else's Mode A
AMTOR connection.
6-68
MAILbox
ON/OFF
off
Pactor
determines if Pactor Mailbox is on-line.
6-68
MAILBOX
ON|OFF
on
Packet
Enables the Packet personal mailbox.
6-69
MAILLED
ON|OFF
on
Packet
Controls the STA/MAIL LED. Flashes
when mail is presence.
6-70
MALL
ON|OFF
on
Packet
Determines the class of packets which are
monitored.
6-71
MARSMODE
n
0
RTTY/ASCII
Use with Promars command to set the
type of MARS QSO.
6-72
MATCH
ON|OFF
on
AMTOR
Used for selectively monitoring portions
of mode B FEC transmissions.
6-73
MAXFRAME
n
4
Packet
Sets the upper limit for the outstanding
packets that can occur at one time.
6-73
MAXSum
nn
30
Pactor
Specifies the number of cycles of error-
ladden information packets received.
6-74
MAXUp
nnn
10
Pactor
Specifies the number of good 100 baud
packets before a SPEEDUP is requested.
6-74
MBEGIN
cccc
<<>>
AMTOR
Allows the display of mode B
transmissions only after the reception of
the beginning of the signal.
6-74
MCOM
ON|OFF
off
Packet
Enables monitoring of connected and
disconnected packet when monitor is on.
6-75
MCON
ON|OFF
off
Packet
Allows the monitoring of other packets
while connected to another station.
6-75
MCTEXT
text
blank
Packet
Allows storing of text messages to be
stored for mailbox. Text is sent when
mailbox is connected.
6-76
MEND
cccc
nnnn
AMTOR
Used with MBEGIN and MATCH and the
mode B receiving end when the MEND
string is received
6-76.
MFILTER
n1-n4
$00
M-Packet
Allows you to eliminate certain characters
from received packets.
6-76
MHCLEAR
--
I-command
Packet
Clears the MHEARD list.
6-77
MHEARD
--
I-command
Packet
A list of all monitored packet stations.
6-77
MODE
--
I-command
All
Selects the operation mode of the MFJ-
1278B.
6-77
MNONAX25
ON|OFF
off
Packet
Allows MFJ-1278B to monitor non AX.25
packet.
6-78
MNONPRIN
ON|OFF
on
Packet
Determines whether monitored packets
containing non-printable characters are
monitored or discarded.
6-78