Epson MediaLink Controller MLC 104 IP Plus User Manual
Mlc 104 ip plus, Setup guide, Medialink
© 2006 Extron Electronics. All rights reserved.
Extron Electronics, USA
1230 South Lewis Street
Anaheim, CA 92805
USA
714.491.1500
Fax 714.491.1517
Extron Electronics, Europe
Beeldschermweg 6C
3821 AH Amersfoort
The Netherlands
+31.33.453.4040
Fax +31.33.453.4050
Extron Electronics, Asia
135 Joo Seng Road, #04-01
PM Industrial Building
Singapore 368363
+65.6383.4400
Fax +65.6383.4664
Extron Electronics, Japan
Kyodo Building
16 Ichibancho
Chiyoda-ku, Tokyo 102-0082 Japan
+81.3.3511.7655
Fax +81.3.3511.7656
www.extron.com
Setup Guide
68-1289-01 Rev. A
08 06
MLC 104 IP Plus
MediaLink
TM
Controller
Table of contents
Document Outline
- Chapter One
- Introduction
- Chapter Two
- MLC 104 IP Plus Hardware Setup
- Chapter Three
- MLC 104 IP Plus Software Setup
- Step 1: Download Device Drivers
- Step 2: Create a New Project
- Step 3: Add an MLC 104 IP Plus Controller and Define its Location
- Step 4: Define E-mail Settings
- Step 5: Add a Serial and an IR Device
- Step 6: Configure the Front Panel Buttons
- Step 7: Configure the Control Modules Using the Auto Fill Feature
- Step 8: Create a Display Shutdown Schedule
- Step 9: Create a Display Lamp Hour Warning E-mail
- Step 10: Create a Display Disconnection E-mail
- Step 11: Build and Upload a Configuration