Mfj-1278b multi-mode appendix h command summary – Epson Multi-mode Data Controller MFJ-1278B User Manual
Page 361
MFJ-1278B MULTI-MODE APPENDIX H COMMAND SUMMARY
Command
Paramete
r
Default
Mode
Function
Page
BKONDEL
ON|OFF
on
Packet
Determines the way the screen is updated
when a character is deleted in the
command mode.
6-19
BLP
ON|OFF
on
Packet
Allows Host Mode operation
6-20
BTEXT
text
blank
Packet
Specifies the text of the beacon packet.
6-21
BUDLIST
ON|OFF
off
Packet
Determines if the packets listed in
LCALLS are to be displayed.
6-22
BUF
n
0-9
CW/RTTY/
Allows addressing of the ten user ASCII
programmable memories.
6-22
BUFKEY
nnn
9
CW/RTTY/
Allows the user to transmit the ASCII
buffer without using the (CTRL-T).
6-23
BUFTIME
n
0
CW
Used to transmit buffer 0 when it is a non-
zero value at the set interval.
6-23
BWNL
ON|OFF
off
AMTOR
Causes the MFJ-1278B to transmit when
it receives a
6-23
CALIBRA
--
I-command
All
Used to transfer the control to the modem
calibration routine.
6-24
CALSET
n
0
All
Specifies the count setting for use by the
calibration routing.
6-24
CANLINE
n
$18 (^x)
Packet
Changes the cancel-line input editing
command character.
6-25
CANPAC
n
$19 (^Y)
Packet
Changes the cancel-packet input editing
command character.
6-26
CBELL
ON|OFF
off
Packet
Sends a bell tone through the computer or
terminal speaker when a packet
connection is made.
6-27
CBell
ON/OFF
OFF
Pactor
Sends a bell through the computer
terminal speaker when a Pactor connect is
established.
6-27
CCITT
ON|OFF
on
RTTY
Determines whether U.S. standard or the
internationally recognized character set is
used.
6-28
CHANGE
-
I-command
AMTOR
Switches from receiver to transmitter in
AMTOR mode A "ARQ".
6-28
CHAT
-
I-command
M-Packet
Allows SYSOP to break onto the
mailbox's connected link.
6-28
CHECK
n
30
Packet
Sets a connection timeout.
6-29
CHECKV1
ON|OFF
off
Packet
Enables the automatic idle-link-
disconnect feature for AX.25 L2V1
connections.
6-29
CHObell
ON/OFF
on
Pactor
Sends a bell tone to the computer or
terminal when a Pactor changeover is
done.
6-30
CHOChar
nnn
25
Pactor
Designates the Pactor changeover
character.
6-30
CMDchr
nnn
$03
Pactor
Deisgnates the Pactor return to command
mode character.
6-30