Ericsson RX8000 Series - Manual (Page 89)

Chapter 3
2. Press the Edit key. The cursor appears below the displayed type (ASI shown
above).
3. Use the S (Up) and T (Down) keys to toggle between the available types: ASI
and G.703 (dependent on model and option licences obtained).
4. Press Save to save the new settings or Edit to abandon the operation and
return to the current setting.
3.5.5.2 2.2 G703
To access this function, press the T (Down) key. The following screen is displayed:
G703 |CONFIGURE G.703 INPUT
2.2 | >
3.5.5.2.1 2.2.1 G703 Status
To access this function, press the X (Forward) key. The following screen is
displayed:
G703 |STATUS
2.2.1 | >
3.5.5.2.1.1 2.2.1.1 Card Alarm Status
To view the Card alarm Status, press the X (Forward) key. The following screen is
displayed:
STATUS |CARD ALARM STATUS
2.2.1.1 | NO ALARM
3.5.5.2.1.2 2.2.1.2 Physical Alert Status
To view the Physical Alert Status, press the T (Down) key. The following screen is
displayed:
STATUS |PHYSICAL ALERT STATUS
2.2.1.2 | LOSS OF SIGNAL
3.5.5.2.1.3 2.2.1.3 MPEG Alert Status
To view the MPEG Alert Status, press the T (Down) key. The following screen is
displayed:
STATUS |MPEG ALERT STATUS
2.2.1.3 | SYNC LOSS
EN/LZT 790 0005 R1A 3-41