Ericsson RX8000 Series - Manual (Page 69)

Chapter 3
3. Press Save to save the new settings or Edit to abandon the operation and
return to the current setting.
3.5.2.2.2.8 2.2.2.8 LNB Power OP
To view and edit the current Source 1 LNB power output settings, press the T
(Down) key. The following screen is displayed and the Edit key is lit:
SOURCE 1 |LNB POWER OP
2.2.2.8 |DISABLE (UNLOCKED)
To enable/disable the LNB Power Op:
1. Press the Edit key. The cursor appears below the first character of the current
setting.
2. Use the S (Up) and T (Down) keys to select ENABLE or DISABLE.
3. Press Save to save the new settings or Edit to abandon the operation and
return to the current setting.
3.5.2.2.2.9 2.2.2.9 LNB Power Level
To view and edit the current Source 1 LNB Power Level, press the T (Down) key.
The following screen is displayed and the Edit key is lit:
SOURCE 1 |LNB POWER LEVEL
2.2.2.9 |13V
(VERT) (UNLOCKED)
To edit the LNB power level:
1. Press the Edit key. The cursor appears below the first character of the current
setting.
2. Use the S (Up) T (Down) keys to set the required value.
3. Press Save to save the new settings or Edit to abandon the operation and
return to the current setting.
3.5.2.2.2.10 2.2.2.10 LNB 22KHz
To enable or disable the Source 1 LNB 22KHz facility, press the T (Down) key. The
following screen is displayed and the Edit key is lit:
SOURCE 1 |LNB 22KHz
2.2.2.10 |ENABLE (UNLOCKED)
To enable/disable the LNB 22KHz facility:
1. Press the Edit key. The cursor appears below the first character of the current
setting.
2. Use the S (Up) T (Down) keys to select ENABLE or DISABLE.
EN/LZT 790 0005 R1A 3-21