Ericsson RX8000 Series - Manual (Page 165)

Chapter 6
Figure 6.2 shows a more detailed picture of the MPEG-2 data transfer. TS-packets
are mapped in a datagram, using User Data Protocol (UDP), Internet Protocol (IP)
and Ethernet.
Figure 6.2: Building the Ethernet Frame
…
Information 14H
Information
Information
20H
8H
188 188 TS packets (1 to7)
UDP datagram
IP datagram
Ethernet frame
6.1.8 SD Video and ASI Output Card (RX8200/HWO/SD)
This option is only available for the RX8200 Receiver.
The SD Video and ASI Output card provides two composite video outputs and two
switchable ASI/SDI outputs.
6.1.9 HD and SD Video and ASI Output Card (RX8200/HWO/HD/3G)
This option is only available for the RX8200 Receiver.
The HD and SD Video and ASI Output card provides one composite video output,
one RGB/YPrPb analog video output and three switchable ASI/SDI/HD-SDI outputs.
6.1.10 High Quality Down-conversion (RX8200/HWO/HQDCONV)
This option is only available for the RX8200 Receiver.
This option provides down-conversion of decoded HD video to SD resolution. Native
HD and SD video outputs are available simultaneously. This option provides grade 1
quality down-converted SD video.
6.1.11 RS232 Low Speed Asynchronous Data and Remote Control
(RX8200/HWO/RS232)
This option is only available for RX8200 Receiver.
This option provides RS232 low speed asynchronous data output and RS232
remote control capability.
EN/LZT 790 0005 R1A 6-7