Ericsson RX8000 Series - Manual (Page 87)

Chapter 3
To choose the Select input type:
1. Press the Edit key. The cursor appears below the displayed type (ASI shown
above).
2. Use the S (Up) and T (Down) keys to toggle between the available types: ASI,
8VSB and AUTO (dependent on model type).
3. Press Save to save the new settings or Edit to abandon the operation and
return to the current setting.
To choose the Primary input:
1. Move to the Primary Input function using the X (Forward) key
2. Press the Edit key. The cursor appears below the displayed type (ASI shown
above).
3. Use the S (Up) and T (Down) keys to toggle between the available types: ASI
and 8VSB (dependent on model type).
4. Press Save to save the new settings or Edit to abandon the operation and
return to the current setting.
3.5.4.2 2.2 8VSB
To access this function, press the T (Down) key. The following screen is displayed:
8VSB |CHANNEL 61 SNR 0.00dB
2.2 |FREQUENCY 755.000 MHz
To choose the Channel to be monitored:
1. Press the Edit key. The cursor appears below the the first character of the
current channel number.
2. Use the S (Up) and T (Down) keys to select the required number.
3. Press Save to save the new settings or Edit to abandon the operation and
return to the current setting.
3.5.4.3 2.3 8VSB CTRL
To access this function, press the T (Down) key. The following screen is displayed:
8VSB CTRL |DIRECT FREQUENCY DISABLED
2.3 |AUTO
TUNE DISABLED
To enable/disable the Direct Frequency function:
1. Press the Edit key. The cursor appears below the current option.
2. Use the S (Up) and T (Down) keys to toggle between the Enabled/Disabled
options until the required option is displayed.
EN/LZT 790 0005 R1A 3-39