B.4.3 dvb-asi input, B.4.4 100/1000baset dual nic input receivers, B.4.5 frame sync connector – Ericsson RX8000 Series User Manual
Page 220: B.4.3, B.4.4, B.4.5, Table b.17
Annex B
B.4.3
DVB-ASI Input
Table B.16: DVB-ASI Copper
Input Specification
Safety status
SELV
Connector type
BNC, Female
Input impedance
75
Ω
Data rate range
0.350 - 160 Mbps
Error decoding
None
B.4.4
100/1000BaseT Dual NIC Input Receivers
Table B.17 100/1000BaseT IP Dual NIC Input Specifications
Input Specification
Safety status
SELV
Connector type
8 way RJ-45
Connector
Designation
100/1000 BT
Signal Type
100/1000BaseT Ethernet (IEEE 802.3/802.3u) Full Duplex mode
Data Rate
1.5 – 216 Mbps
TS
CBR MPTS/SPTS feeds
Error correction
Pro-MPEG FEC
B.4.5
Frame Sync Connector
The receiver can frame lock to an external video source. The frame information is
input as a composite synchronous signal, with or without active video. The user can
offset the sync to the video output by ±32,000 HD pixels, with a resolution of one
pixel.
It is possible to connect multiple receivers to the same reference signal. This input
requires an external 75
Ω termination.
EN/LZT 790 0005 R1A
B-16