Ericsson RX8000 Series - Manual (Page 53)

Chapter 3
EDIT
SAVE DOWN RIGHT
LEFT UP LCD
USB Connector
(Servicing Only) Status LED
CA SLOT
Figure 3.2 Front Panel Controls (RX8200)
3.3.1 USB Connector
This connector is for factory / service use only.
3.3.2 Status LED
This multi-coloured LED provides a visual indication of the summary status of the
unit. The LED can be any one of three colours:
• Red (CRITICAL Error). Indicates that the unit has lost lock with the Transport
Stream.
• Amber (MAJOR or MINOR Error). Indicates that the unit is locked to a
Transport Stream but an error has been detected signifying incorrect conditions
or system functioning.
• Green (NO Errors). Indicates that the unit is locked to a Transport Stream and
correct conditions and system functioning are detected.
3.3.3 LCD
A 2-line x 40-character back-lit dot-matrix Liquid Crystal Display (LCD) displays
various menus and settings. The menus and setting available will vary depending on
which receiver model is being used and which options have been enabled through
the purchase of a suitable license.
See Front Panel Menus on page 3-8 for details of all menus.
All menu is numbered to aid with navigation and are arranged in 6 main categories:
1. System: This menu includes user settings for: IP Control ports set-up, IP Control
ports link status, Unit Build version details, Unit Electronic Serial Number.
2. Input: This menu is dependent on which Hardware Input Card Option is fitted to
the unit: Satellite Input Card, I/P Input Card, G.703 Input Card or 8VSB Input
Card.
EN/LZT 790 0005 R1A 3-5