Ericsson RX8000 Series - Manual (Page 172)

Chapter 6
6.2.27 MPEG-2 SD 4:2:2 Decoding (RX8200/SWO/MP2/SD/422)
This option is only available for the RX8200 Receiver.
This option enables MPEG-2 SD 4:2:2 Decoding and requires the installation of the
MPEG-2 SD 4:2:2 hardware option card.
6.2.28 MPEG-2 HD 4:2:2 Decoding (RX8200/SWO/MP2/HD/422)
This option is only available for the RX8200 Receiver.
This option enables MPEG-2 HD 4:2:2 Decoding and requires the installation of the
MPEG-2 SD 4:2:2 hardware option card.
6.2.29 MPEG-4 SD 4:2:2 Decoding (RX8200/SWO/MP4/SD/422)
This option is only available for the RX8200 Receiver.
This option enables MPEG-2 and MPEG-4 SD 4:2:2 Decoding and requires the
RX8200/BAS/2 MPEG-4 4:2:2 capable base unit.
6.2.30 MPEG-4 HD 4:2:2 Decoding (RX8200/SWO/MP4/HD/422)
This option is only available for the RX8200 Receiver.
This option enables MPEG-2 and MPEG-4 HD 4:2:2 Decoding and requires the
RX8200/BAS/2 MPEG-4 4:2:2 capable base unit.
6.2.31 Down-Conversion (RX8200/SWO/DCONV)
This option is only available for the RX8200 Receiver.
This option enables the down-conversion of HD to SD and allows the simultaneous
presentation of HD and SD on video output interfaces.
6.2.32 Up-Conversion (RX8200/SWO/UPCONV)
This option is only available for the RX8200 Receiver.
This option enables the up-conversion of SD to HD and allows the non-simultaneous
up-conversion to 720p or 1080i resolution.
6.2.33 Cross-Conversion (RX8200/SWO/XCONV)
This option is only available for the RX8200 Receiver.
EN/LZT 790 0005 R1A 6-14