Ericsson RX8000 Series - Manual (Page 29)

Chapter 1
EDIT
SAVE DOWN RIGHT
LEFT UP LCD
USB Connector
(Servicing Only) Status LED
CA SLOT
Figure 1.5 Front Panel Controls (RX8200)
Table 1.12 Front Panel Controls
Item Color Description
CA Slot - Conditional Access Slot. Located on front panel of
RX8200 and rear panel of RX8310, RX8315 and
RX8330.
USB Connector - This connector is for factory / service use only.
Red CRITICAL Error. Indicates that the unit has lost
lock with the Transport Stream.
Amber MAJOR or MINOR Error. Indicates that the unit is
locked to a Transport Stream but an error has
been detected signifying incorrect conditions or
system functioning.
Status LED
Green NO Errors. Indicates that the unit is locked to a
Transport Stream and correct conditions and
system functioning are detected.
LCD - 2-line x 40-character back-lit dot-matrix Liquid
Crystal Display (LCD).
Edit - This pushbutton enables you to edit the
parameters on the selected LCD menu. Press
again to exit without saving any changes. Integral
LED lit when functional.
Save - This pushbutton enables you to save any modified
parameters on the selected LCD menu. Integral
LED lit when functional.
S Up
T Down
W Left (Back)
X Right (Forward) - Navigation pushbuttons for selecting relevant LCD
menu or for incrementing / decrementing selected
parameter values. Integral LED lit when
functional.
EN/LZT 790 0005 R1A 1-21