Efficient Networks 107-0001-000 - Manual (Page 92)

Chapter 4: System Commands Efficient Networks ® Router family
Command Line Interface Guide
Page 4-22 Efficient Networks
®
system backup pinginterval
Changes the ping interval for a group, that is, the number of seconds between pings
during a test of the addresses in the group.
To see the current ping intervals, use the system list command. For more information
about the ping interval and Dial Backup, see ” Ping Interval, Number of Samples, and
Success Rate” on page 6-13 of the Technical Reference Guide.
NOTE:
If you change the ping interval to 0, the group of addresses is disabled.
Mgmt Class
Network (R/W)
Input Format
system backup pinginterval []
Parameters
Examples
The following command changes the ping interval to 10 seconds for group 0.
The following command disables the pinging of addresses in group 1.
Response
Command prompt.
a
a Integer
Number of seconds in the ping interval for the group.
b
b
integer, 0 - 65535 (0)
Optional, number of a group.
-> system backup pinginterval 10
-> system backup pinginterval 0 1