Efficient Networks 107-0001-000 - Manual (Page 224)

Chapter 6: Remote Commands Efficient Networks ® Router family
Command Line Interface Guide
Page 6-36 Efficient Networks
®
remote listbridge
Lists the current bridge settings for the specified remote router entry.
Mgmt Class
Network (R/W)
Input Format
remote listbridge
Parameters
Response
Typical response when entered with no parameter:
Exchange spanning tree with dest... no
TX Encryption........................ unknown
RX Encryption........................ unknown
mtu.................................. 1500
*** If entered with no parameters, bridge settings for all re-
mote routers entries are listed.
a
a
ASCII string
Name of the remote router.
-> rem listbridge
BRIDGING INFORMATION FOR
Bridging enabled..................... yes
Exchange spanning tree with dest... no
Bridge only PPPoE with dest........ no
BRIDGING INFORMATION FOR
Bridging enabled..................... yes
Exchange spanning tree with dest... no
Bridge only PPPoE with dest........ no
Mac addresses that dial remote..... none