Efficient Networks 107-0001-000 - Manual (Page 201)

Efficient Networks ® Router family
Command Line Interface Guide
Chapter 6: Remote Commands
Efficient Networks
®
Page 6-13
remote addserver
This Network Address Translation (NAT) command is used to add a server’s IP
address (on the LAN) associated with this remote router for a particular protocol. To
learn more, see “
Network Address Translation (NAT)” on page 4-17.
Multiple system addserver and remote addserver commands can designate different
servers for different protocols, ports, and interfaces. When a request is received, the
router searches the server list for the appropriate server. The order of search for a
server is discussed in “
Server Request Hierarchy” on page 4-22
To delete a server designation, use the remote delserver command.
Mgmt Class
Network (R/W)
Input Format
remote addserver [
port> []]
Parameters
One of the following command actions:
a
a
Dotted-decimal notation
Selects the host with this IP address as server.
discard Discards the incoming server request.
me Sends the incoming server requests to the local rout-
er, regardless of the IP address.
Protocol used by the selected server.
b
b
Integer
Numerical protocol ID.
tcp TCP only.
udp UDP only.
all All protocols.
First or only port as seen by the remote end. Port used by the selected
server.
c
c
Integer, 0 - 65,535
Numerical port value; a value of 0 matches any port.
ftp File Transfer Protocol (FTP) port.
h323 H.323 port.
http Hypertext Transfer Protocol (HTTP) port.