Efficient Networks 107-0001-000 - Manual (Page 77)

Efficient Networks ® Router family
Command Line Interface Guide
Chapter 4: System Commands
Efficient Networks
®
Page 4-7
system addhostmapping
Remaps a range of local-LAN IP addresses to a range of public IP addresses on a
system-wide basis. These local addresses are mapped one-to-one to the public
addresses.
NOTE:
The range of public IP addresses is defined by only. The
rest of the range is computed automatically (from to
+ number of addresses remapped - 1) inclusive.
Automatic SNTP requests are generated if the system needs to get the time. You can
specify an SNTP server using the command
sntp server and a UTC offset with the
command sntp offset .
Mgmt Class
Network (R/W)
Input Format
system addhostmapping
Parameters
Response
Command prompt.
a
a
Dotted-decimal notation
First IP address in the range of IP addresses to be
remapped.
a Last address in the range of IP addresses to be
remapped.
c addr> a Last address in the range of IP addresses to be
remapped.