Efficient Networks 5100 Series User Manual
Speedstream, Router user guide
Table of contents
Document Outline
- About the SpeedStream Router
- Firewall Security
- Hardware Description
- General Safety Guidelines
- Minimum System Requirements
- Hardware Installation
- Windows 95 / 98 / ME
- Windows NT 4.0
- Windows 2000
- Windows XP
- Logging On/Off the Web Interface
- Navigating the Web Interface
- PPP (Point-to-Point Protocol)
- User Profiles
- WAN Interface
- Navigation
- Access the WAN Interface Configuration Wizard
- Enable a WAN Connection
- Disable a WAN Connection
- Delete a WAN Connection
- Select the Default WAN Interface
- Add a New Virtual Connection (VC)
- Specify Connection Name
- Finish
- Enter IP Information
- Use PPPoE
- Select Interface Options
- Specify Connection Name
- Finish
- Enter IP Information
- Select Interface Options
- Specify Connection Name
- Finish
- Configure PPPoE / Client Only
- Configure PPPoE / Bridge Only
- Configure PPPoE / 2684B Connection
- Configure PPPoE / PPPoE Bridge Protocol
- Enter User Information
- Select PPP Options
- Enter Static IP Address
- Select Interface Options
- Specify Connection Name
- Finish
- Host
- DHCP
- Admin User (System Login)
- Time Client
- Static Routes
- NAT/NAPT
- Port Forwarding
- Firewall
- UPnP (Universal Plug and Play)
- Bridge Mode
- RIP (Routing Information Protocol)
- Server Ports
- Dynamic DNS
- System Summary
- System Log
- ATM/AAL Status/Statistics
- DSL Status/Statistics
- Ethernet Status/Statistics
- USB Status/Statistics
- Routes
- Diagnostics
- Interface Map
- Reboot
- Reset
- Firmware Update
- Basic Troubleshooting Steps
- Interpreting the LED Display
- Resolving Specific Issues
- Contacting Technical Support