Efficient Networks 107-0001-000 - Manual (Page 137)

Efficient Networks ® Router family
Command Line Interface Guide
Chapter 4: System Commands
Efficient Networks
®
Page 4-67
Parameters
Examples
Response
Command prompt.
system vpnpassthru
Enables and disables VPN pass-through mode. When enabled, multiple concurrent
VPNs are allowed.
Mgmt Class
Network (R/W)
Input Format
system vpnpassthru enable | disable
Parameters
Response
Command prompt.
default Restores the port value to the default value 23 and re-enables the
port.
disabled Disables the existing Telnet port.
a
a Integer
Defines a new Telnet port number. Use this option to restrict re-
mote access.
This command sets the Telnet port to the default value (23).
-> system telnetport default
This command disables the existing telnet port.
-> system telnetport disabled
This command remaps the telnet port to port 188.
-> system telnetpport 154
enable Enables the VPN pass-through mode.
disable Disables the VPN pass-through mode.