Efficient Networks 107-0001-000 - Manual (Page 109)

Efficient Networks ® Router family
Command Line Interface Guide
Chapter 4: System Commands
Efficient Networks
®
Page 4-39
system list
Lists the system settings for the target router.
Mgmt Class
Network (R)
Input Format
system list
Parameters
None
Response
The following is an example of a typical response.
-> system list
GENERAL INFORMATION FOR file systems...done.
System started on.............. 9/8/2000 at 13:29
Authentication override........ none file systems...done.
WAN to WAN Forwarding.......... no file systems...done.
Block NetBIOS Default.......... no file systems...done.
BOOTP/DHCP Server address...... none
Telnet Port.................... default (23) file
systems...done.
Telnet Clients................. all
SNMP Port...................... default (161) file
systems...done.
SNMP Clients................... all file systems...done.
HTTP Port...................... default (80)
HTTP Clients................... all
Syslog Port.................... default (514)
Allowed Syslog Servers......... all
Default Syslog Servers......... none
System message:
Security timer................. 30 minutes
One WAN Dial Up................ no
Management feature............. 0
Rip timer...................... 45
Backup......................... no (no valid remote profile is
enabled)
Retry Interval In Minutes...... 30
Stability Interval In Minutes.... 3