Ike proposals set encryption, Mgmt class, Input format – Efficient Networks 107-0001-000 User Manual
Page 400: Parameters, Example, Response, Ike proposals set lifetime, Ike proposals set encryption -42, Ike proposals set lifetime -42, Ike proposals set encryp- tion
Chapter 12: IKE/IPsec Commands
Page 12-42
Efficient Networks
®
ike proposals set encryption
Sets the IKE proposal parameter that requests ESP encryption and specifies the
encryption method used. See “
IKE Proposal Commands” on page 5-58.
Mgmt Class
Security (R/W)
Input Format
ike proposals set encryption
Parameters
Example
Response
Command prompt.
ike proposals set lifetime
Sets the IKE proposal parameter that specifies the length of time (in seconds) before
the Phase 1 SA expires; the recommended value is 86400 (24 hours). When the time
limit expires, IKE renegotiates the connection. See “
IKE Management” on page 5-52.
Mgmt Class
Security (R/W)
Input Format
ike proposals set lifetime
Choose one of the following:
des
Use DES (56-bit) encryption.
3des
a
a
Software Option Key enabled feature
Use 3DES (168-bit) encryption (if 3DES encryption is enabled).
b
b
ASCII string
Name of the IKE proposal to which the encryption parameter is
added.
c
c
To see the proposal names in use, use the
command.
-> ike proposals set encryption des my_ike_proposal