Epson ActionLaser 1600 - Manual (Page 40)

2. Select a PostScript-formatted file.
3. Click Open. This sends the file to the printer.
4. Click Cancel to close the dialog box.
Renaming the printer
By default, the printer isassigned a name when you install it.
However, if you are installing the printer on a network that
includes other printers, it is highly recommended that you
assign it a unique name.
1. Bring up the EpsonScript Utility and select your printer
using PostScript Printers and AppleTalk Zones.
2. Click the Rename button. This brings up the following
dialog box:
New name for "ActionLaser 1600”:
Doc Department
Printer status :
Note: Not all printers change their names immediately. You may need to
writ a minute or even turn the printer off and on before clicking the
‘Update Lists’ button on the main window to update the zone/printer lists.
3. Enter a unique name for your printer. The name can be up
to 31 characters in length.
4. Click OK.
After you rename the printer, you need to reselect it in the
Chooser.
3-16 Using EpsonScript in a Macintosh Environment