Epson ActionLaser 1600 - Manual (Page 23)

Selecting a PostScript printer
If you are familiar with Windows printer installation, add the
Apple LaserWriter II NTX printer to your Windows printer list
and skip to "Running the EpsonScript Installer.” Here are the
steps for adding the Apple LaserWriter II NTX printer:
1.
2.
3.
4.
5.
6.
In the Windows Main group, double-click the Control
Panel icon. Then double-click the Printers icon.
Choose the Add button
In the list of printers select Apple LaserWriter II NTX and
choose Install.
If prompted, insert the appropriate Windows diskette and
choose OK.
After the printer is displayed in the Installed Printers list,
choose the Set As Default Printer button.
Choose Close. Then close the Control Panel.
Running the EpsonScript Installer
The EpsonScript Installer sets up the EpsonScript driver and
installs the screen fonts for EpsonScript.
1. Save all current work and quit all Windows software
programs.
2. Insert Disk 1 of the EpsonScript PC diskettes into a diskette
drive.
3.
In the Program Manager, choose Run from the File menu.
This brings up the Run dialog box.
Installing the Drivers and Utilities 2-7