Epson IWE3200-H - Manual (Page 72)

67
DNS Proxy
Static DNS Mappings Not set
Filters/Firewall
Packet Filters Not set
URL Filters Not set
VLAN Disabled
WAN ICMP Request Blocking Disabled
State Packet Inspection (SPI) Disabled
Authentication
Web Redirection Disabled
RADIUS Not set
RADIUS Robustness Reboot User
Name reboot
Session Control Disabled
Management
Web-Based Management Type LAN only
SNMP Enabled
SNMP Read-Only Community public
SNMP Read-Write Community private
A-2: LED Definitions
There are several LED indicators on the housing of a Router. They are defined as follows:
z
PWR : Power
z
ALV
: Alive. Blinks when the IWE3200-H is working normally.
z RF : IEEE 802.11b/g interface activity
z
WAN/LAN
: Ethernet WAN/LAN interface activity
Fig. 109. LED Indicator.
A-3: Rear Panel
Fig. 120. Rear Panel.