Epson IWE3200-H - Manual (Page 71)

66
Appendix A
A-1: Default Settings
TIP:
Press the Default switch on the housing of a powered-on Router to reset the configura-
tion settings to factory-set values.
Setting Name Default Value
Global
User Name root
Password root
Operational Mode Gateway with a Static-IP DSL/Cable
Connection
WAN Interface
Type DHCP
Changeable MAC Address Default MAC address of WAN interface
IP Address 192.168.100.1
Subnet Mask 255.255.255.0
Default Gateway 0.0.0.0
Primary DNS Server 0.0.0.0
Secondary DNS Server 0.0.0.0
Host Name gateway
Domain (DNS suffix) Not set
PPP
User Name username
Password Not set
Telephone Number Not set
PPPoE
User Name username
Password Not set
Service Name Service name
LAN Interface
Method of obtaining an IP Address Set manually
IP Address 192.168.0.1
Subnet Mask 255.255.255.0
Default Gateway 0.0.0.0
DHCP Server
Functionality Enabled
Default Gateway 192.168.0.1
Subnet Mask 255.255.255.0
Primary DNS Server 192.168.0.1
Secondary DNS Server 0.0.0.0
First Allocataeble IP Address 192.168.0.2
Allocateable IP Address Count 20
NAT Server
Functionality Enabled
Virtual Server Mappings Disabled
DMZ Host Not set
Static NAT Mappings Not set