Epson IWE3200-H User Manual
Page 11
6
In addition, it can also be configured to accept management commands only from specific
hosts.
UPnP.
The access Router responds to UPnP discovery messages so that a Windows XP
user can locate the access Router in My Network Places and use a Web browser to config-
ure it.
SNMP.
SNMP (Simple Network Management Protocol) MIB I, MIB II, IEEE 802.1d,
IEEE 802.1x, Private Enterprise MIB are supported.
System log.
For system operational status monitoring.
Local log.
System events are logged to the on-board RAM of the access Router and
can be viewed using a Web browser.
Remote log by SNMP trap.
Systems events are sent in the form of SNMP traps to
a remote SNMP management server.
z
LAN/WAN Configurable Ethernet Switch Ports.
The IWE3200-H provides a 4-port
Ethernet switch so that a stand-alone Ethernet hub/switch is not necessary for connecting
Ethernet client computers to the Router. These Ethernet ports can be configured as WAN ports
for multiple DSL/cable-based Internet connections support.
z
Hardware Watchdog Timer.
If the firmware gets stuck in an invalid state, the hardware
watchdog timer will detect this situation and restart the IWE3200-H. Accordingly, the
IWE3200-H
can provide continuous services.
z
Configuration Reset. Resetting the configuration settings to factory-set values.