Epson 400 - Manual (Page 81)

8. Press the ink cartridge clamp down until it locks in place.
The following illustration shows color ink replacement. For
black ink replacement, press down the smaller clamp on
the left.
9. Press the
4
cleaning button. The printer moves the print
head and begins charging the ink delivery system. This
process may take a few minutes to complete.
c
Caution:
The
2
power light continues to flash while the printer
performs the ink charging operation. Never turn off the
printer while this light is flashing. Doing so can result in
incomplete charging of ink.
Note:
Even if you do not press the
4
cleaning button, the printer
moves the print head and begins the ink charging process about
60 seconds after you replace the ink cartridge.
10. When the ink charging procedure is finished, close the
printer cover.
11. Send data to resume printing.
27-2
L Hawaii2 Ref. Guide
Rev.b
A5 size Chapter 5
06-02-97 DR, pass 0
5-6 Maintenance and Transportation