Hawaii2 ref. guide rev.b – Epson 400 User Manual

Page 42

2. Slide the left edge guide to the left as far as it will go. Pull up

the paper support extension and pull out the output tray
extension.

3. Fan a stack of paper; then tap it on a flat surface to even the

edges.

4. Load the stack of paper with the printable surface up and the

right edge of the paper resting against the right side of the
sheet feeder.

Note:
Always load paper into the sheet feeder short edge first. Load
envelopes flap edge first with the flap side down.

4-2

Hawaii2 Ref. Guide
Rev.b

A5 size

Chapter 2

06-02-97

DR, pass 0

Getting Started

2-21