Epson 400 - Manual (Page 78)

To replace an ink cartridge, follow these steps.
1. Make sure the printer is on. Determine which cartridge
needs to be replaced as indicated by the
*
black or
)
color
ink out light.
Note:
If you need to replace an ink cartridge when the
*
and
)
ink out
lights are off, see page 6-28.
2. Make sure the printer is paused and the output tray at the
front of the printer is lowered; then open the printer cover.
3. Hold down the
4
cleaning button for three seconds until
the
print head moves left slightly to the cartridge replacement
position, and the
2
power light flashes when the print
head is in position.
Note:
❑
The printer automatically moves the print head back to its
home (far right) position after about 60 seconds if you have
not started the replacement procedure.
❑ If you hold down the
4
cleaning button when both
*
and
)
ink out lights are off, the printer starts cleaning the print
head.
c
Caution:
Do not move the print head by hand. Always use the
4
cleaning button to move it. Otherwise you may damage
the printer.
5
M
a
int
e
na
nc
e
R
Hawaii2 Ref. Guide
Rev.b
A5 size Chapter 5
06-02-97 DR, pass 0
Maintenance and Transportation 5-3