Canon imagePROGRAF TX-3100 36" Printer with Basket - Manual (Page 793)

1. Open the top cover and make sure that the carriage is not over the platen. 1.
2. Remove any paper scraps left inside the top cover. 2.
Remove Jammed Roll Paper
Remove a Jammed Sheet
3. Close the top cover. 3.
Check 5 Was the paper cut before the ink dried?
Set a longer Ink drying wait time in Advanced paper settings in the touch screen menu.
Menu Structure
Check 6 Is the printer driver Print Quality set to the lowest quality setting?
Follow the steps below to set Print Quality to higher quality settings, and then print.
• Windows •
Change the Print Quality settings in the printer driver Advanced Settings .
Changing the Print Quality and Correcting Image Data (Windows)
• macOS •
Change the Print Quality in the printer driver Quality & Media settings.
Changing the Print Quality and Correcting Image Data (macOS)
Check 7 Does the paper used for printing create a lot of cutting dust?
Set Cut-dust reduction in the touch screen menu Advanced paper settings to ON .
Reducing Dust from Cutting Rolls
793